PART |
Description |
Maker |
IL-2022-H IL-2022-L IL-2022-M |
Reed Switch for Inductive Loads
|
Reed Relays and Electronics
|
BTS611L1 BTS611L1-13 |
Fast demagnetization of inductive loads
|
Infineon Technologies A...
|
BTS612N1 BTS612N1-13 |
Fast demagnetization of inductive loads
|
Infineon Technologies A...
|
E-L9823 |
Octal low-side driver for bulb, resistive and inductive loads with serial input control, output protection and diagnostic
|
STMicroelectronics
|
L9826TR |
OCTAL LOW-SIDE DRIVER FOR RESISTIVE AND INDUCTIVE LOADS WITH SERIAL/PARALLEL INPUT CONTROL, OUTPUT PROTECTION AND DIAGNOSTIC
|
ST Microelectronics
|
BTS630 |
From old datasheet system PWM Power Unit (The device allows continuous power control for lamps,LEDs or inductive loads.)
|
SIEMENS[Siemens Semiconductor Group]
|
BTS410E2 BTS410E2-13 |
Fast demagnetization of inductive loads
|
Infineon Technologies A...
|
ZXLD1350 |
The ZXLD1350 is a continuous mode inductive step-down converter, designed for driving single or mult
|
Zetex Inc.
|
EDS-220-Z-LA-I EDS-260-Z-LA-I EDS-370-Z-LA-I EDS-2 |
POSITION, LINEAR SENSOR-INDUCTIVE, 220mm, 4-20mA, CYLINDRICAL POSITION, LINEAR SENSOR-INDUCTIVE, 260mm, 4-20mA, CYLINDRICAL POSITION, LINEAR SENSOR-INDUCTIVE, 370mm, 4-20mA, CYLINDRICAL POSITION, LINEAR SENSOR-INDUCTIVE, 250mm, 4-20mA, CYLINDRICAL POSITION, LINEAR SENSOR-INDUCTIVE, 300mm, 4-20mA, CYLINDRICAL POSITION, LINEAR SENSOR-INDUCTIVE, 100mm, 4-20mA, CYLINDRICAL
|
Micro-Epsilon Group
|
REC-10LA |
Precision Linear Transducers, Designed for Mount in Hydraulic or Pneumatic Cylinder, Conductive Plastic Element, Designed for High Pressure Chamber of Small Cylinders, Equipped with Glass-Sealed Electrical Outputs
|
Vishay
|
IR1150 IR1150PBF IR1150ISTRPBF |
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Consumer market One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Industrial market.
|
International Rectifier
|